Vertex Standard VX-3200 Rear Panel, Antenna Socket, 13.6V DC Cable Pigtail with Connector, External Speaker Jack, D-Sub 9-PinAccessory Connector

CONTROLS & CONNECTORS

Rear Panel

Antenna Socket

The 50-Ohm coaxial feedline to the antenna must be connected here, using a type-M (PL-259) plug.

13.6V DC Cable Pigtail with Connector

The supplied DC power cable must be connected to this 2-pin connector. Use only the supplied fused cable, extended if necessary, for power connection.

External Speaker Jack

An external loudspeaker may be connected to this 2-contact, 3.5-mm mini-phone jack.

Caution: Do not connect either wire of this line to ground, and be certain that the speaker has adequate capability to handle the audio output (4 W) from the radio.

D-Sub 9-Pin Accessory Connector

External TX audio line input, PTT (Push To Talk), Squelch, and external RX audio line output signals may be obtained from this connector for use with accessories such as data transmission/reception modems, etc.

Page 4 VX-3200 OPERATING MANUAL