Vestax CDX-35C ⑬ Loop Start OPEN/CLOSE, ⑭ Loop END, Player Select Switch, Sub Cue, ⑮ RELOOP/EXIT

⑬ LOOP START	◯ OPEN/CLOSE
	21

Used for setting a start loop point and new cue point during play.

Press to load or eject the disc. Each press will open or close the disc tray on the transport. Tray will not open unless the disc has been paused.

⑭ LOOP END

Used for setting the end loop point and and	◯ PLAYER SELECT SWITCH
	22
releasing loop action.	The switch for select main player.
	◯ SUB CUE
	23
⑮ RELOOP/EXIT	Cue switch for second player unit.
This button is for cancel and return loop play .	◯ SUB PLAY/PAUSE KEY
During the loop play , press the RELOOP/EXIT
	24
button. When playback reaches the loop out point ,	The play/pause switch for second player unit.
playback continues without returning to the loop in	◯ PITCH INDICATER
point.
	25
	Shows the present pitch value.

⑯REVERSE

Press the REVERSE button. The REVERSE indicater lights. The player starts reverse play. During the reverse play, press REVERSE or STOP button . Player will return normal playback.

◯26 DISPLAY

Shows the information of playback. (Refer to "DISPLAY")

◯27 CONNECTOR

⑰ REPEAT	Plug your control cables for player unit.
Used to activate REPEAT mode. All repeat (Play
the next song and then repeat the whole CD) is
selected by pressing this button once. Single repeat
(repeat current song only) is selected by pressing
one more time. Repeat off is selected by one more
push.
⑱ DISPLAY KEY
Used to change DISPLAY MODE. Usually display
shows TRACK REMAIN TIME. TRACK
PLAYING TIME is selected by pressing button
once. DISC TOTAL REMAIN TIME is selected by
pressing one more time.
⑲ RING DISPLAY KEY
Used to change RING DISPLAY MODE.
⑳ STOP
Used to stop CD spinning.

9