①PLAY/PAUSE KEY
Each press of the PLAY/PAUSE button cause the operation to change from play to pause or from pause to play.
②CUE KEY
Pressing cue button returns the CD to the last set "CUE" point and pauses it. The CUE point is either the position at which "PLAY" was last actually started or the "LOOP IN" point it was previously set. Pressing the "CUE" button a second time allows the music to be played from the "CUE" position until it is released.
Repeatedly pressing the cue button allows the CD to be played from the same position any number of times. The CUE LED will light up from the time the CUE button is pressed until the CD has reset to the position at which play was started. Steady lighting of this LED indicates the ready condition.
③MONITOR KEY
When the monitor button is pressed during the PAUSE mode ,a short loop sound of the paused position is played back for monitoring. Then exact position for the next start can be searched and set by using the SEARCH DIAL.
④POINT FOCUS KEY
Used for changing time of monitor sound.
⑤CUE MEMORY
Press the cue memory button. The CUE BANK indicater lights. You can select any cue bank. Press BANK button (1,2,3).The controller memorizes cue point.
⑥CUE MEMO 1,2,3 KEY
Used for setting and recall cuepoint.
⑦NEXT KEY
Used for skipping forward to the starting point of the
next track. The number of tracks skipped ahead.
⑧PREVIOUS KEY
Used for skipping backwards to the starting point of the current track(one press). Pressing twice returns to the starting point of the previous track. Pressing additional times will return to the corresponding previous track.
⑨SEARCH DIAL
This search dial serves two functions depending on the mode you are working in.
a, The search dial will act as a slow flame search control when the CD is not playing but either paused or set to a cue point.To set a new flame cue point, spin the dial then press play when you have determined the proper position. Press CUE to return the 'CUE POINT'.
b, The search dial will temporarily bend the pitch of the music up to +/- 10% if the song is already playing by rotating the dial clockwise to speed up or counterclockwise to slow down. The amount of pitch change is determined by the speed of rotation.
⑩PITCH CONTROLLER
The pitch can be changed up to +/- 10% by moving sliding fader.
⑪KEY CONTROL
The key can be change up to +/- 1 octave by rotating volume.
⑫MASTER TEMPO
Press the MASTER TEMPO button. The MASTER TEMPO indicater lights. You can change the playing speed by moving PITCH CONTOROLLER.
Even when the music's speed changes, the music pitch does not change.
8
