Vestax PCV-275 owner manual HOW to Change the Fader Unit, MICROPHONE, SUB Input Section

HOW TO CHANGE THE FADER UNIT

■HOW TO REMOVE THE TOP PANEL

○1 Remove each fader knobs and 10 screws which fix the top panel.

○2 Remove the top panel.

Driver

Top panel

■HOW TO CHANGE THE FADER UNIT ○1 Remove the screws on the fader panel.

○2 Remove the fader unit from position in mixer.

○3	Carefully remove the multi-cable connector from
	fader unit.
○4 Attach multi-cable connector
	to new fader unit.	Driver
○5	Position the fader	unit
	carefully and secure
	with screws.

Main panel

MICROPHONE, SUB INPUT SECTION

9

10

11

12

13

14

LINE 4 IN

LR

MIC

MIC-1 MIC-2

MIC-1

MINMAX

MIC-2

MINMAX

EQ

HI

-16dB +16dB

LO

-16dB +16dB

EFFECT

OFF POST

CUE

OFFON

○9 LINE INPUT JACK(LINE4)

Input connectors for line level equipment such as CD players,tape decks ,DATs, or MDs etc.

○10 MIC INPUT JACK(MIC1,2)

Input jacks of mic1, mic2.

○11 MIC LEVEL

Adjusts the input level from all of the microphone inputs.

○12 MIC EQUALIZER(HI,LOW)

Adjusts the HI and LOW frequencies for all of the microphone input.

○13 EFFECT SWITCH

Used when sending signal to the external effect processor connected to the effect SEND/RETURN.

○14 CUE SWITCH

Used to send the signal from the mic channel to the monitor section for headphone monitoring.

5