Vestax PDX-d3S owner manual Operation, In Case Of Playing Ep Size Record, N O T E

Models: PDX-d3S

1 12
Download 12 pages 39.61 Kb
Page 10
Image 10
OPERATION

OPERATION

1 Place the record on the turntable mat.

2 Press the power switch button provided at rear panel to turn "ON" position.

3 Remove the stylus protector if cartridge is detachable one. 4 Push the start/stop button, then platter will start to turn. 5 Move the tone-arm position over the record. Put it down to the

record, and play will begin.

6 Set the turning speed to 33 1/3rpm or 45rpm by pushing the speed select switch in obedience to the playing record RPM.

N O T E

A manual method of operation has been chosen for the playing of records instead of using "Cue Levers".The unit has been set to select 33-1/3 rpm automatically when the power button is pressed to on. Push the 45 rpm speed select button if you play 45 rpm record.

7 Move the tone-arm to the armrest when play is finished. 8 Push the start/stop button, and platter will stop.

9 Turn off the power.

IN CASE OF PLAYING EP SIZE RECORD

Fit the EP ADOPTOR in the center spindle, and start to play after fitting EP RECORDS in EP ADOPTOR.

STYLUS ILLUMINATOR (Detachable Mini Light)

This unit features a small light for illuminating the stylus. It is detachable and you can remove it when not in use.

9

Page 10
Image 10
Vestax PDX-d3S owner manual Operation, In Case Of Playing Ep Size Record, STYLUS ILLUMINATOR Detachable Mini Light, N O T E