Vestax PDX-d3S owner manual Installation and Connection

d3S/E 02.5.16 2:08 PM ページ 7

○3 Insert the headshell into the front part of the tone-arm. Turn thr LOCK RING to the directoin of the arrow shown the fig until fixing the headshell.

○4 Adjustment of Overhang

As shown in the illustration, overhang indicates the distance from the stylus to end of headhshell. Please set the distance to 50mm. If the overhang adjustment is not properly made, the stylus will not be able to trace the record grooves correctly.

50mm

N O T E

Be share not to touch stylus during adjustment with finger.

INSTALLATION AND CONNECTION

CONNECTION OF PHONO TERMINAL AND PLUG					INSTALLATION
1				●Do not place the unit where it is exposed to direct sun light,
○Connect the output to inputs of amplifier or mixer.					high temperature of humidity to prevent possible troubles.
		EAR PANEL	AMP/AUDIO M
	PDX-d3S R

RCA JACK WHITE（L）�	RCA CABLE（WHITE/L）� �	PHONO L Channel�
RCA JACK RED（R）�	RCA CABLE（RED/R）�	PHONO R Channel�
GND TERMINAL
	GND CABLE（BLACK）�	GND TERMINAL

N O T E

Be sure to connect firmly the GND terminal to the amplifier or mixer, or a power source HUM will result.

●Place the unit in a stable and horizontal position, where there is little or no vibration.

●Locate the unit as far away from the speakers as possible and isolate the unit from sound radiation from them.

●If the unit is placed too close to the radio, interference to AM/FM reception may result

ILLUSTRATION OF CONNECTION

PDX-d3S

PDX-d3S

R/RED L/WITHE R/RED L/WITHE

R/RED

R/RED L/WITHE

DJ MIXER PMC-07ProL/WITHE

PROFESSIONAL MIXING CONTROLLER							WARNING;SHOCK HAZARD-DO NOT OPEN.
							AVIS;RISQUE DE CHOC ELELCTRIQUE -NE PAS OUVRIR.
			SESSION IN	LINE 2		LINE 1		C A U T I O N
								RISK OF ELECTRIC
MADE IN JAPAN								SHOCK. DO NOT OPEN
SERIAL NO.
	MASTER OUT 1						SUB	MAIN
		R	L	R	L	R	L
POWER			MASTER OUT 2	PHONO 2		PHONO 1
AC 12V	R	L
				GND 2		GND 1
			78