Vestax PDX-d3S owner manual Vestax Corporation, Remote Control, Specification, CONNECTION ex

REMOTE CONTROL

It is possible to control two turntables remotely.

○1 Prepare for 3.5mm monaural phone plug cable Turn on Sync ON/OFF SW.

○2 Connect REMOTE OUT JACK at the rear panel with another PDX-d3S REMOTE IN JACK at the rear panel by using the cable.

○3 The player connected at the REMOTE OUT JACK is MASTER of the PDX-d3S. The player connected at the REMOTE IN JACK is the Slave of the PDX-d3S.

○4 Pushing START/ STOP SWITCH of the master PDX-d3S will make the connection between master PDX-d3S and slave PDX-d3S. Then slave PDX-d3S acts the same as master PDX-d3S without touching slave PDX- d3S. Connecting the REMOTE IN JACK of third PDX-d3S with REMOTE OUT JACK of slave PDX-d3S, third PDX-d3S will also act the same as master PDX-d3S It is possible to connect a fourth PDX-d3S, to be controlled the same as master PDX-d3S by REMOTE CONTROL.

CONNECTION

ex.

MASTER SLAVE1 SLAVE2

SPECIFICATION

TURNTABLE�	MOTOR�	DIRECT DRIVE QUARTZ�
�	STARTING UP TIME�	0.5sec（ 33 1/2 rpm ） 70°�
�	STARTING TORQUE�	1.6kg cm�
�	BRAKING SYSTEM�	ELECTRONIC BRAKE�
�	RAMBLE（ S/N RATIO ）�	78dB（ IEC 98 WTD ）�
�	SPEED�	33 1/2 rpm, 45rpm�
�	PITCH�	± 10%（ DETOUCHABLE 100mm FADER ）�
�	WOW & FLUTTER�	0.03% W.R.M.S.�
ARM	TYPE�	ANTI SKIPPING TONE-ARM SYSTEM. TRACING�
	�	HOLD BALANCE SYSTEM�
	EFFECTIVE LENGTH�	230mm ± 1mm�
	TRACKING ERROR�	+2°32’～ +0°32’�
	STYLUS PRESSURE�	ADJUSTMENT RANGE 0 ～ 7.0g�
	LIGHT（ OPTIONAL )�	DETOUCHABLE MINI LIGHT DC12volt 100mA�
	SPEED LOCK�	QUARTZ LOCK�
	REMOTE�	MOMENTARY START（ MINI JACK ）�
	DIMENSION�	（ W ）450mm X（ H ）150mm X（ D ）370mm�
	WEIGHT�	9.5kg�
	POWER	AC120V or 230V

Vestax Corporation