independent of the accumulator and the calculating register, it retains its value until you clear it with the Memory Total (MT) key.
SLIDE SWITCH FEATURES
This section illustrates and describes the mode switches you can use to control your calculator’s operation.
1.↓ 5/4 ↑ Decimal Rounding Selector
↓This causes automatic round down (truncation).
5/4 This setting causes automatic round off. If the last digit of the result that will be printed or printed/displayed upon rounding is followed by a value of 0 to 4, the digit is unchanged. If the last digit of the result that will be printed or printed/displayed upon rounding is followed by a value of 5 to 9, the digit is rounded up.
↑This setting causes automatic round up
2. • PRINT | Printer Select Switch | |
|
|
|
•
PRINT Printer is activated as long as calculator is turned on.
3. + 0 1 2 3 4 6 F | Decimal Point Selector |
+Monetary Add Mode: At this setting, amounts entered are assumed to be monetary. The calculator automatically supplies a decimal point to the left of the last two digits entered. Use this setting to add, subtract, multiply and divide decimals.
Units/price mode operation:
Multiplication: The first factor will be entered as a whole number and the second factor will have a decimal point supplied to the left of the last two digits.
Division: The first factor will have a decimal point supplied to the left of the last two digits and the second factor will be entered as a whole number.
0,1,2,3,4,6 Fixed decimal point mode; these settings specify the number of digits to the right of the decimal point that are shown in the result.
FFloating decimal point mode; this setting specifies that all digits of the result are shown, up to a maximum of 10 on model
4. • | Financial Calculation Switch | |
| • | Without Financial Calculation |
|
| Tax 1 key change to Amortization key |
- 8 -
