Pioneer DEH-P85BT Turning the off clock display on or off, Setting the FM tuning step, English

Models: DEH-P85BT

1 144
Download 144 pages 22.85 Kb
Page 49
Image 49
Turning the off clock display on or off

 

Section

Operating this unit

02

 

 

2Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute

As you select segments of the clock display the segment selected will blink.

3Push MULTI-CONTROL up or down to put a clock right.

Setting the FM tuning step Note

You can match the clock to a time signal by pressing MULTI-CONTROL.

!If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

!If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

Turning the off clock display on or off

If the off clock display is turned on, when the sources and the feature demo are off, the clock display appears on the display.

1Use MULTI-CONTROL to select Off clock.

2Press MULTI-CONTROL to turn the off

clock display on.

# To turn the off clock display off, press MULTI-CONTROL again.

Setting the FM tuning step

Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on.

1 Use MULTI-CONTROL to select FM step.

2Press MULTI-CONTROL to select the FM tuning step.

Pressing MULTI-CONTROL repeatedly will switch the FM tuning step between 50 kHz and 100 kHz while AF or TA is on. The selected FM tuning step will appear in the display.

Switching Auto PI Seek Note

The tuning step remains at 50 kHz during manual tuning.

Switching Auto PI Seek

The unit can automatically search for a differ- ent station with the same programming, even during preset recall.

1Use MULTI-CONTROL to select Auto PI.

2Press MULTI-CONTROL to turn Auto PI

seek on.

# To turn Auto PI seek off, press MULTI-CONTROL again.

Switching the warning tone

If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.

1Use MULTI-CONTROL to select Warning tone.

2Press MULTI-CONTROL to turn warning

tone on.

# To turn warning tone off, press MULTI-CONTROL again.

Switching the face auto open

To protect against theft, this unit features de- tachable front panel. To detach the front panel easily, the front panel opens automatically. This function is on as a default.

1Use MULTI-CONTROL to select Face auto open.

English

En Switching the warning tone49Switching the face auto open

Page 49
Image 49
Pioneer DEH-P85BT Turning the off clock display on or off, Setting the FM tuning step, Switching Auto PI Seek, English