Pioneer DEH-P85BT Audio Adjustments, Using balance adjustment, Introduction of audio adjustments

Section
02		Operating this unit
	Audio Adjustments		Using balance adjustment
	Introduction of audio adjustments		You can change the fader/balance setting so
			that it can provide you an ideal listening envir-
			onment in all occupied seats.
			1 Use MULTI-CONTROL to select Fader.
			# If the balance setting has been previously ad-
			justed, Balance will be displayed.
			2 Push MULTI-CONTROL up or down to
	1
	1 Audio display		adjust front/rear speaker balance.
			Each time MULTI-CONTROL is pushed up or
		Shows the audio adjustment status.
			down, the front/rear speaker balance moves
	1 Press MULTI-CONTROL to display the		towards the front or rear.
			F 15 to R 15 is displayed as the front/rear
	main menu.
			speaker balance moves from front to rear.
	FUNCTION, AUDIO and ENTERTAINMENT
			# F/R 0 is the proper setting when only two
	appear on the display.
			speakers are used.
	2 Use MULTI-CONTROL to select AUDIO.		# When the rear output setting is Rear SP :S/W,
	Turn to change the menu option; press to se-		you cannot adjust front/rear speaker balance.
	lect.		Refer to Setting the rear output and subwoofer
	The audio function name appears on the dis-		controller on page 50.
	play.		3 Push MULTI-CONTROL left or right to
	3 Turn MULTI-CONTROL to select the		adjust left/right speaker balance.
	audio function.		Each time MULTI-CONTROL is pushed left or
	Turn MULTI-CONTROL to switch between the		right, the left/right speaker balance moves to-
	audio functions in the following order:		wards the left or right.
	Fader (balance adjustment)—Powerful (gra-		L 15 to R 15 is displayed as the left/right
	phic equalizer adjustment)—50Hz (7-band		speaker balance moves from left to right.
	graphic equalizer adjustment)—LOUD (loud-
	ness)—Sub W.1 (subwoofer on/off setting)—		Using the equalizer
	Sub W.2 (subwoofer setting)—Bass (bass
			The equalizer lets you adjust the equalization
	boost)—HPF (high pass filter)—SLA (source
	level adjustment)—ASL (automatic sound le-		to match car interior acoustic characteristics
	velizer)		as desired.
	# You can also select the audio function by
	pressing AUDIO on the remote control.		Recalling equalizer curves
	# You can select the Sub W.2 only when sub-		There are seven stored equalizer curves which
	woofer output is turned on in Sub W.1.
			you can easily recall at any time. Here is a list
	# When selecting the FM tuner as the source,
			of the equalizer curves:
	you cannot switch to SLA.
	# To return to the display of each source, press		Display	Equalizer curve
	BAND.
			Powerful	Powerful
	# If you do not operate functions except for
			Natural	Natural
	50Hz within about 30 seconds, the display is
	automatically returned to the ordinary display.		Vocal	Vocal
44		En