Pioneer DEH-P85BT operation manual Switching the feature demo, Switching the Ever Scroll, BT Audio

	Section
Operating this unit	02

!The sound is muted or attenuated, MUTE or ATT are displayed and no audio adjust- ment is possible.

!Sound from this system returns to normal when the muting or attenuation is can- celed.

2Press MULTI-CONTROL to turn the re-

verse mode on.

# To turn the reverse mode off, press MULTI-CONTROL again.

Note

English

1Use MULTI-CONTROL to select Mute.

2Press MULTI-CONTROL to switch the tel- ephone muting/attenuation.

Pressing MULTI-CONTROL will switch be- tween TEL ATT (attenuation) and TEL mute (muting) and that status will be displayed.

Switching the feature demo

The feature demo automatically starts when power to this unit is turned off while the igni- tion switch is set to ACC or ON.

1Use MULTI-CONTROL to select Demonstration.

You can also turn on or off reverse mode by press- ing BAND while this unit is turned off. For more details, see Reverse mode on page 9.

Switching the Ever Scroll

When Ever Scroll is set to ON, text information recorded on CD or iPod scrolls continuously in the display. Set to OFF if you prefer the infor- mation to scroll just once.

1Use MULTI-CONTROL to select Ever-scroll.

2Press MULTI-CONTROL to turn the Ever

Scroll on.

# To turn the Ever Scroll off, press

2Press MULTI-CONTROL to turn the fea-

ture demo on.

# To turn the feature demo off, press MULTI-CONTROL again.

Notes

!Remember that if the feature demo continues operating when the car engine is turned off, it may drain battery power.

!You can also turn on or off feature demo by pressing DISPLAY while this unit is turned off. For more details, see Feature demo mode on page 9.

Switching the reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.

1Use MULTI-CONTROL to select Reverse mode.

MULTI-CONTROL again.

Activating the BT Audio source

You need to activate the BT Audio source in order to use a Bluetooth audio player.

This setting is set to on by default. If you do not use BT Audio, you can turn it off.

1Use MULTI-CONTROL to select

BT AUDIO.

2Press MULTI-CONTROL to turn the

BT Audio source on.

# To turn the BT Audio source off, press

MULTI-CONTROL again.

# If you turn the BT AUDIO in the initial settings off, the history of the most recently connected Bluetooth audio stored in this unit is cleared.

En 51