Pioneer DEH-P85BT Disconnecting a cellular phone, Registering connected cellular phone, English

	Section
Operating this unit	02

#The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 52.

Using a cellular phone to initiate a connection

Putting the unit in Connection open mode al- lows you to establish a Bluetooth wireless con- nection from your phone. You may need to refer to the operation manual that came with your phone if you are unsure how to initiate a connection from your phone.

1Use MULTI-CONTROL to select Connection open in the function menu.

2Press MULTI-CONTROL to open the con- nection.

Always waiting is displayed and the unit is now on standby for connection from cellular phone.

3Use cellular phone to connect to this

unit.

# Operation varies depending on the type of your cellular phone. Refer to the instruction man- ual that came with your cellular phone for de-

tailed instructions.

# You may need to enter the link code on your

cellular phone to complete the connection.

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 52.

Disconnecting a cellular phone

When you are done using your phone with this unit, you can close the Bluetooth wireless con- nection.

1Use MULTI-CONTROL to select Disconnect phone in the function menu. Device name of the connected phone appears in the display.

2Press MULTI-CONTROL to disconnect a cellular phone from this unit.

After the disconnection is completed, Disconnected is displayed.

Registering connected cellular phone

You can register a phone that is temporarily connected to this unit in order to take full ad- vantage of the features available with Blue- tooth wireless technology. A total of three phones can be registered.

1Use MULTI-CONTROL to select Set phone in the function menu.

2Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3

(user phone 3)

# As you select each assignment, you can see whether or not a phone is already registered there. If the assignment is empty, No data is dis- played. If the assignment is already taken, the de- vice name appears. To replace an assignment with a new phone, first delete the current assign- ment. For more detailed instructions, see Deleting

a registered phone on the next page.

# If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3Press MULTI-CONTROL to register the currently connected phone.

When the registration is completed,

Reg. Completed is displayed.

# If the registration failed, Reg. ERROR is dis- played. In this case, return to step 1 and try again.

Note

Depending on the type of cellular phone, registra- tion is available only from a cellular phone. (Refer to Using a cellular phone to initiate a connection on this page.)

English

En 35