Pioneer DEH-P85BT operation manual 02Operating this unit, Introduction of advanced operations

Section

02Operating this unit

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option; press to se- lect.

The function name appears on the display.

3Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL to switch between the functions in the following order:

BSM (best stations memory)—Regional (re- gional)—Local (local seek tuning)—

PTY search (program type selection)— Traffic Announce (traffic announcement standby)—Alternative FREQ (alternative fre- quencies search)—News interrupt (news

program interruption)

# You can also select the function by pressing

FUNCTION on the remote control.

# If MW/LW band is selected, you can only se-

lect BSM or Local.

# To return to the frequency display, press

BAND.

# If you do not operate functions within about

30seconds, the display is automatically returned to the ordinary display.

Storing the strongest broadcast frequencies

1Use MULTI-CONTROL to select BSM in the function menu.

2Press MULTI-CONTROL to turn BSM on. Six strongest broadcast frequencies will be

stored in the order of their signal strength.

# To cancel the storage process, press MULTI-CONTROL again.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing MULTI-CONTROL up or down.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Use MULTI-CONTROL to select Local in the function menu.

2Press MULTI-CONTROL to turn local

seek tuning on.

# To turn local seek tuning off, press MULTI-CONTROL again.

3Push MULTI-CONTROL left or right to set the sensitivity.

There are four levels of sensitivity for FM and two levels for MW/LW:

FM: Level 1—Level 2—Level 3—Level 4

MW/LW: Level 1—Level 2

The Level 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under 1 to 6 on the remote control and once stored there you can tune in to those frequencies with the touch of a button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 1 to 6 on the remote con- trol.

Selecting alternative frequencies

When the tuner can’t get good reception, the unit automatically search for a different sta- tion in a same network.

1Use MULTI-CONTROL to select Alternative FREQ in the function menu.

2Press MULTI-CONTROL to turn AF on.

# To turn AF off, press MULTI-CONTROL again.

14 En