Pioneer DEH-P85BT operation manual Receiving traffic announcements, Using PI Seek

	Section
Operating this unit	02

Notes

!Only RDS stations are tuned in during seek tuning or BSM when AF is on.

!When you recall a preset station, the tuner may update the preset station with a new fre- quency from the station’s AF list. No preset number appears on the display if the RDS data for the station received differs from that of the originally stored station.

!Sound may be temporarily interrupted by an- other program during an AF frequency search.

!AF can be turned on or off independently for each FM band.

Using PI Seek

If the tuner can’t find a suitable station, or re- ception status becomes bad, the unit will auto- matically search for a different station with a same programming. During the search,

PI seek is displayed and the output is muted.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as when travelling long distances, the unit can be set to perform PI Seek during preset recall.

!The default setting for Auto PI Seek is off. See Switching Auto PI Seek on page 49.

Limiting stations to regional programming

When AF is used, the regional function limits the selection of stations broadcasting regional programs.

1Use MULTI-CONTROL to select Regional in the function menu.

2Press MULTI-CONTROL to turn the re-

gional function on.

# To turn the regional function off, press MULTI-CONTROL again.

Notes

!Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

!The preset number may disappear from the display if the tuner tunes in a regional station which differs from the originally set station.

!The regional function can be turned on or off independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you re- ceive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a sta- tion that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which cross-references TP stations).

1Tune in a TP or enhanced other net- work’s TP station.

The TP () indicator will light.

2Press TA/NEWS to turn traffic an-

nouncement standby on.

# To turn traffic announcements standby off, press TA/NEWS again.

3Use MULTI-CONTROL to adjust the TA volume when a traffic announcement be- gins.

The newly set volume is stored in memory and recalled for subsequent traffic announce- ments.

4Press TA/NEWS while a traffic an- nouncement is being received to cancel the announcement.

The tuner returns to the original source but re- mains in the standby mode until TA/NEWS is pressed again.

English

En 15