Pioneer DEH-P85BT operation manual Using ITS playlists, Creating a playlist with ITS programming

Section

03Available accessories

#If you do not operate functions except for ITS memo and TitleInput "A" within about 30 seconds, the display is automatically returned to the ordinary display.

Function and operation

Play mode, Random mode, Scan mode, Pause, Compression and TitleInput "A" op- erations are basically the same as that of the built-in CD player.

Notes

! If you select other discs during repeat play,

the repeat play range changes to

M-CD repeat.

! If you perform track search or fast forward/re-

verse during Track repeat, the repeat play

range changes to Disc repeat.

! After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

! When playing a CD TEXT disc on a CD TEXT

compatible multi-CD player, you cannot

Function name

Play mode

Operation

Refer to Selecting a repeat play range on page 20.

But the repeat play ranges you can select are different from that of the built-in CD player. The repeat play ranges of the multi-CD player are as below:

!M-CD repeat – Repeat all discs in the multi-CD player

!Track repeat – Repeat just the current track

!Disc repeat – Repeat the cur- rent disc

switch to TitleInput "A". The disc title has al-

ready been recorded on a CD TEXT disc.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selec- tions.

Random mode

Refer to Playing tracks in random

order on page 20.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to

Scan mode

Refer to Scanning folders and

tracks on page 20.

99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold be- fore the CDX-P1250 and CDX-P650, up to 24

Pause

Refer to Pausing disc playback on

page 21.

Refer to Using compression and BMX on page 21.

Multi-CD player has DBE (dynamic bass emphasis) function instead

tracks can be stored in the playlist.)

1 Play a CD that you want to program.

Push MULTI-CONTROL up or down to select

the CD.

Compression of BMX.

ITS play mode

The settings can be switched as below:

COMP OFF—COMP 1—COMP 2

—COMP OFF—DBE 1—DBE 2

Refer to Using ITS playlists on this

page.

ITS memo

Refer to Using ITS playlists on this

page.

TitleInput "A"

Refer to Entering disc titles on the

next page.

ITS memo in the function menu.

3Select the desired track by pushing MULTI-CONTROL left or right.

4Push MULTI-CONTROL up to store the currently playing track in the playlist. Memory complete is displayed and the cur- rently playing selection is added to your play- list.

5Press BAND to return to the playback display.

58 En