
Section
02
Operating this unit
Entering PIN code for Bluetooth wireless connection
To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function.
!With some Bluetooth audio players, you may be required to enter to this unit in ad- vance PIN code of your Bluetooth audio player, in order to set this unit ready for a connection from your Bluetooth audio player.
1Use
2Push
select a number.
# You can also press 0 to 9 on the remote con- trol to select a number.
3Push
4After inputting PIN code (up to 16 di- gits), press
unit.
# Pushing
display, and you can change the PIN code.
# If an invalid character has been entered, sub-
sequent characters are not displayed.
# If an invalid character has been entered in the beginning, PIN code cannot be stored in mem- ory.
2Press DISPLAY to select the desired character type.
Press DISPLAY repeatedly to switch between the following character types:
Alphabet (upper
3Push
4Push
5After inputting device name, press
# Pushing
name.
# If an invalid character has been entered, sub-
sequent characters are not displayed.
# If an invalid character has been entered in the beginning, device name cannot be stored in memory.
Displaying system version for repair
Should this unit fails to operate properly and you consult with dealer for repair, you may be asked to indicate the system versions of this unit and of Bluetooth module. You can display the versions and confirm them.
1Use
The system (microprocessor) version of this unit is displayed.
Editing device name
You can edit the device name.
The device name is set to Pioneer BT unit as default.
1Use
2Push
unit.
# Pushing
52
En