Bosch Appliances manual Installation, Typical Wire Planning Chart for the D9210B

D9210B

Installation

3.2.2Pulling and Marking the Wires

Running wire. Use Table 4 to estimate the wire bundle size for your knockouts and where to mount the D9210B. Tag your wire runs to prevent confusion during installation and troubleshooting. Figure 2 shows the wiring for a typical D9210B installation.

	Suggested	Approximate	Recommended Wire	Recommended
Purpose	Wire Tag	Diameter	Type	Color Code
Power/SDI data	Tag A	0.25 in.	4/22 AWG quad	SDI:	A
		(6.4 mm)	(2500 ft. / 762 m)	(Green)
			4/18 AWG quad	(Yellow)	B
			(5000 ft. / 1,524 m)
				Pwr:	+ (Red)
					- (Black)
RTE power/input*	Tag B	0.25 in.	4/22 AWG quad	Green/Black
		(6.4 mm)
REX power/input*	Tag C	0.25 in.	4/22 AWG quad	Yellow/Black
		(6.4 mm)
Strike power*	Tag D	0.375 in.	2/16-18 AWG zip	Red
		(9.5 mm)
Door contact*	Tag E	0.125 in.	2/22 AWG	White
		(3.2 mm)	(500 feet / 152 m)
Reader*	Tag F	0.375 in.	6/22 AWG	12 VDC: Red
		(9.5 mm)	conductor	5 VDC: Orange
			(500 feet / 152 m)	COM: Black
				D1: White
				D0: Green
				LED: Brown
				Buzzer: Yellow
Buzzer*	Tag G	0.125 in.	2/22 AWG twist	+(Red), - (Blk)
		(3.2 mm)
Emergency Exit*	Tag I	0.125 in.	2/18 AWG twist	Blue
		(3.2 mm)
Power Supply	Tag J	0.25 in.	2/18 AWG zip	Brown
Transformer		(6.4 mm)

* Be sure to multiply the wires by the number of D9210Bs in the enclosure.

Table 4: Typical Wire Planning Chart for the D9210B

D9210B Operation and Installation Guide

32206G Page 14 © 2002 Bosch Security Systems