D9210B

3.2.5Door Lock, Terminals 2, 3 and 4

Description. A removable relay (model D136) provides a dry contact single pull double throw output. Some strikes require a closed circuit to unlock the door while others require an open circuit to unlock the door. The relay will support 12 VDC @ 2A or 24 VDC @ 2.5 A or 12/24 VAC @ 40 A (See Table 6).

 

Installation

 

 

State

Description

Common Input (3)

For 12/24 VDC strikes, provide the input power

 

here from the power supply.

Lock N/C (2)

For door strikes that require an interruption of

 

power to open, connect the positive side of the

 

door strike to this terminal.

Lock N/O (4)

For door strikes that require power to open,

 

connect the positive side of the door strike to

 

this terminal.

 

Table 6: Door Lock Strikes

Relay Installation. The D136 Relay is installed into the relay socket of

D9210B

 

the D9210B. Follow these steps for installing the relay:

 

 

 

 

1.

Locate the relay socket on the D9210B board (shown in

1

MANUFACTURER

 

 

 

PWR +

NAME

 

 

Figure 3).

2

 

 

 

LCKCOM

 

 

 

 

LCKN/C

 

 

2.

Place the relay into the socket. The plug-in relay has two

3

 

 

5

 

TOP

 

 

4

 

 

 

LCKN/O

 

 

 

legs on the bottom and three legs on the top. When

 

L

NAME

 

 

F

 

 

 

E

 

 

inserting the relay, ensure that it is oriented as shown in

 

T

MANUFACTURER

 

 

 

 

 

 

 

 

Figure 3.

 

 

 

 

 

 

Figure 3: Relay Installation

3.2.6Request to Enter [RTE], Terminals 11 and 12

Description. When Terminal 11 is momentarily shorted to Terminal 12, the strike is activated and the door point is shunted.

Shunt Only: An option is provided that only shunts the point when this input is momentarily shorted. To activate the shunt, but not the strike, program RTE Shunt Only? as [YES].

3.2.7Request to Exit [REX], Terminals 13 and 12

Description. When Terminal 13 is momentarily shorted to Terminal 12, the strike is activated and the door point is shunted.

Shunt Only: An option is provided that only shunts the point when this input is momentarily shorted. To activate the shunt, but not the strike, program [REX] Shunt Only? as [YES].

REX must not be used for emergency exit applications. NFPA 101 requires that a UL listed panic device be used to provide direct power from the standby power source. (see Figure 2: Wiring Diagram for Typical D9210B Installation, p.15 for wiring an emergency exit device). Check with your local Authority Having Jurisdiction (AHJ) prior to installing your system.

3.2.8Enclosure Tamper Switch, Terminals 8 and 9

Description. A short to this loop will generate a Missing Trouble Point ### for the point number assigned to the D9210B. With this tamper point faulted, the D9210B will still function.

Connect a N/O tamper switch to Terminals 8 and 9. Upon opening the enclosure, the tamper switch will short the inputs and generate the Missing Trouble Point ### message.

SDI FAILURE ### and MISSING PT ### are reported to the central station when the SDI bus has failed or the D9210B is missing.

D9210B Operation and Installation Guide

© 2002 Bosch Security Systems

Page 17

32206G

Page 17
Image 17
Bosch Appliances D9210B manual State Description Common Input, Lock N/C, Lock N/O, Door Lock Strikes

D9210B specifications

The Bosch Appliances D9210B is a remarkable addition to any modern kitchen, reflecting the brand's long-standing commitment to quality, innovation, and performance. This appliance, often revered for its versatility and user-friendly design, embodies the essence of Bosch's engineering excellence.

One of the standout features of the D9210B is its sleek and sophisticated design. With a streamlined appearance, it can seamlessly integrate into various kitchen styles, from contemporary to traditional. The stainless steel finish not only adds a touch of elegance but also ensures durability and ease of maintenance.

The D9210B is equipped with advanced cooking technologies that cater to both novice cooks and seasoned chefs. It boasts a powerful convection heating system, ensuring even heat distribution for perfectly cooked meals. This technology enables faster cooking times and promotes energy efficiency, making it an environmentally friendly choice. Users can enjoy the advantages of precision cooking, allowing for a wider range of culinary techniques and styles.

Another essential feature of the Bosch D9210B is its intuitive control system. The easy-to-use digital display allows users to select and adjust settings with precision. The sensor technology automatically adjusts cooking times and temperatures, ensuring optimal results with minimal effort.

Safety is also a top priority with the D9210B. It is designed with several safety mechanisms, including automatic shut-off and a safety lock to prevent unintended use, making it a reliable appliance for families.

In addition to its functional attributes, the Bosch D9210B places great emphasis on energy efficiency. The appliance is designed to minimize energy consumption without sacrificing performance, contributing to lower utility bills and a reduced carbon footprint.

Maintenance is made easy with the D9210B. The appliance features removable components that are dishwasher safe, allowing for a straightforward cleaning process. Furthermore, Bosch's reputation for reliability ensures that users can count on this appliance for years of trouble-free operation.

Overall, the Bosch Appliances D9210B exemplifies a perfect balance of style, efficiency, and advanced cooking technology, making it an excellent investment for any kitchen. It is a symbol of the brand's dedication to enhancing culinary experiences while maintaining the highest standards of quality and innovation.