|
| D9210B |
|
| Contents |
1.0 | Introduction | 5 |
1.1 | Manual Organization | 5 |
1.2 | Other Literature Referenced | 5 |
1.3 | Documentation Conventions | 5 |
1.3.1 | Type Styles Used in this Manual | 5 |
1.3.2 | Tips, Important Notes, Cautions and Warnings | 6 |
1.4 | FCC Notice | 6 |
1.5 | Regulatory Listings | 6 |
2.0 | D9210B Overview | 7 |
2.1 | System Description | 7 |
2.1.1 | Operational Primer | 7 |
2.1.1.1 | Outputs | 7 |
2.1.1.2 | Inputs | 7 |
2.1.1.3 | Access Levels | 8 |
2.1.1.4 | Skeds | 8 |
2.2 | Physical Overview | 9 |
2.3 | Basic Features, Displays and Reports | 9 |
2.3.1 | Basic Features | 9 |
2.3.2 | Displays and Reports | 10 |
2.4 | Materials Included | 10 |
2.5 | Ordered Separately | 11 |
2.6 | Listings and Approval Information | 12 |
2.6.1 | Underwriters Laboratories (UL) | 12 |
2.6.2 | Other Listings and Approvals | 12 |
3.0 | Installation | 13 |
3.1 | System Planning | 13 |
3.2 | Procedure | 13 |
3.2.1 | Step 1: Mounting the Enclosure and Installing the D9210B | 13 |
3.2.2 | Step 2: Pulling and Marking the Wires | 14 |
3.2.3 | Step 3: Mounting | 16 |
3.2.3.1 | D9210BLC | 16 |
3.2.3.2 | D9210B | 16 |
3.2.3.3 | D9210BC | 16 |
3.2.4 | Step 4: Door Contact (Onboard) Point, Terminals 9 and 10 | 16 |
3.2.5 | Step 5: Door Lock, Terminals 2, 3 and 4 | 17 |
3.2.6 | Step 6: Request to Enter (RTE), Terminals 11 and 12 | 17 |
3.2.7 | Step 7: Request to Exit (REX), Terminals 13 and 12 | 17 |
3.2.8 | Step 8: Enclosure Tamper Switch, Terminals 8 and 9 | 17 |
3.2.9 | Step 9: Connecting the Card Reader, Terminals 12, 14, 15, 16, 17, and 18 | 18 |
3.2.10 | Step 10: Setting the Dipswitch and Tagging the Unit | 19 |
3.2.11 | Step 11 Connecting Power and SDI, Terminals 1, 3, 5, 6, and 7 | 20 |
3.2.12 | Step 12: Programming and Activating the D9210B | 20 |
3.2.13 | Step 13: Testing the D9210B | 21 |
4.0 | Operation | 23 |
4.1 | Door Release Application | 23 |
5.0 | Troubleshooting | 25 |
| D9210B Operation and Installation Guide |
|
© 2002 Bosch Security Systems | Page 3 | 32206G |