Additional Information
| This unit is not correctly connected to the input | Check the connection. | |
| source device. |
| |
|
|
| |
No picture | The input signal has not been correctly selected. | Select the correct input signal with the input keys: Video, | |
| |||
|
| ||
|
| ||
|
|
| |
| POWER LED or LAMP LED blinking. | Please contact your Vidikron dealer for assistance. | |
|
|
| |
Image is unstable | The connection cables are not connected to this | Correctly connect the cables to the appropriate terminals. | |
unit. |
| ||
|
| ||
Picture is blurred | The projection lens is not correctly focused. | Adjust the focus of projection lens with the focus ring. | |
|
| ||
This unit and the screen are not aligned | Adjust the projection angle and direction, and the height | ||
| squarely. | of this unit. | |
Remote control does | The batteries are exhausted. | Replace both batteries with new ones. | |
not work correctly |
|
| |
|
|
| |
LAMP LED blinks in | The front lamp cover is not correctly attached. | Correctly attach the front lamp cover. | |
|
| ||
The cooling fan does not work properly. | Please contact your Vidikron dealer for assistance. | ||
red |
|
| |
The temperature inside this unit is extremely | Check that the ventilation holes are not blocked. | ||
| high. |
| |
|
|
| |
POWER LED blinks in | The lamp has exceeded its specified usage | Replace the lamp with a new one. | |
orange and green | hours. |
| |
The lamp has burned out. | Replace the lamp with a new one. | ||
sequentially | |||
|
| ||
|
|
|
English
45
