Vidikron 40 40ET owner manual Selecting Aspect Ratio, PIP/ POP function

English

Vidikron Owner’s Manual

Selecting "ASPECT RATIO"

■Select the proper aspect ratio according to the content being used. There are four aspect

ratios for choice.

■ANAMORPHIC: The image is compressed vertically, but anamorphic software will appear properly proportioned. This is best suited for use with 16:9 DVD's.

■4 X 3: The input signal will be scaled to fit 4 : 3 display mode in the center screen.

■LETTERBOX: Image in letterbox format is enlarged to fit 16:9 full screen display and the upper/lower portion are cropped.

■I-WIDE: This transforms a 4x3 image to a 16x9 image.

PIP/ POP function

■Press the PIP button to enable the PIP function.

■ For PIP purposes, there are two groups of inputs separated by their display modes: Video Group: Video, S-Video and Component Y/CB/CR inputs

Graphic Group: HDTV input and Computer input.

■The PIP can show one input from the Graphic Group within one input from the Video Group, or show one input from Video Group within one input from the Graphic Group.

■Press the PIP button to switch to the main window or turn off PIP function.

■Select the input source of the main window by pressing the INPUT button.

■Press the ACTIVE button to switch to the active window. You can change the input signal setting in the active window.

■Press PIP+ or PIP- to adjust the size of PIP window.

■Adjust the position of the PIP window with the ARROW keys (c,e,d,f).

■Press POP to enable the POP function.

32