Additional Information
| This unit is not correctly connected to the input | Check the connection. |
| source device. |
|
|
|
|
No picture | The input signal has not been correctly selected. | Select the correct input signal with the input keys: Video, |
| ||
|
| |
|
| |
|
|
|
| POWER LED or LAMP LED blinking. | Please contact your Vidikron dealer for assistance. |
|
|
|
Image is unstable | The connection cables are not connected to this | Correctly connect the cables to the appropriate terminals. |
unit. |
| |
|
| |
Picture is blurred | The projection lens is not correctly focused. | Adjust the focus of projection lens with the focus ring. |
|
| |
This unit and the screen are not aligned | Adjust the projection angle and direction, and the height | |
| squarely. | of this unit. |
Remote control does | The batteries are exhausted. | Replace both batteries with new ones. |
not work correctly |
|
|
|
|
|
LAMP LED blinks in | The front lamp cover is not correctly attached. | Correctly attach the front lamp cover. |
|
| |
The cooling fan does not work properly. | Please contact your Vidikron dealer for assistance. | |
red |
|
|
The temperature inside this unit is extremely | Check that the ventilation holes are not blocked. | |
| high. |
|
|
|
|
POWER LED blinks in | The lamp has exceeded its estimated life. | Replace the lamp with a new one. |
orange and green | The lamp has burned out. | Replace the lamp with a new one. |
sequentially |
|
|
|
|
|
English
45
