Vidikron vision70 1 2 3 4 5, 678

Controls and Functions

Vidikron Vision 70 Series Owner’s Operating Manual 7

PRELIMINARY

1. CABLE ACCESS DOOR

Open to access connectors.

2. DOOR RELEASE BUTTON

3. CABLE OPENING

Pass cables through this opening.

4. LAMP MODULE COVER

Remove this cover to access the lamp compartment.

5. FRONT/REAR ADJUSTERS

Use these to adjust the projector height or projection angle.

6. CEILING MOUNT HOLES

Use these to attach the ceiling bracket to the projector.

To access the connector panel, press

the door release button so it pops out.

Turn the knob clockwise or

counter-clockwise and pull gently on it

to open the door.

Figure 2-3 shows the Vision 70 connector panel.

Figure 2-3. Vision 70 Connector Panel

S-VID /

S-VID

1 2 3 4 5678