Installation
Vidikron Vision 70 Series Owner’s Operating Manual 21
PRELIMINARY
Install Ceiling Mount Adapters/Projector Stands: For ceiling installations, these brackets
bring the mounting points for the projector mounting rails (included with the projector
ceiling mount kit) from the bottom of the projector up and around the AutoScope lens motor
housing. For floor installations (where the projector is upright), the adapters allow the
projector to lie flat on the mounting surface.
Using six (6) each of the supplied, 10-32 x 1/2” Pan-Head Phillips screws (item #2) and nylon
spacers (item #5), attach the AutoScope Ceiling Mount Adapters/Projector Stands (items #3
and #4) to the projector as shown in Figure 3-6.
Figure 3-6. Vision 70 with Ceiling Mount Adapters/Projector Stands
DO NOT OVER-TIGHTEN THE SCREWS.
Caution