Vidikron Vision 150 VHD Controller Rear Panel, Hdmi OUT, Inputs, Composite Video Input

Controls and Functions

Figure 2-5shows the rear connector panel on the VHD Controller.

2.5

VHD Controller Rear Panel

3 7 9

Serial No

Model

Video Processor / Controller

HDMI Out

		INPUTS
R/Pr	G/Y	B/Pb	H	V
					HD1
					HD2
R/Pr	G/Y	B/Pb	H	V
				Pb	Pr
	HDMI 1		HDMI 2		Component Video

SYSTEM CONTROL INTERFACE	CAUTION	!
	RISK OF ELECTRIC SHOCK
	DO NOT OPEN
	AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR

TRIGGERS

				CAUTION: TO REDUCE THE RISK OF ELECTRIC
				SHOCK, DO NOT REMOVE COVER. NO USER-
				SERVICEABLE PARTS INSIDE. REFER SERVICING
1	2	3	IR	TO QUALIFIED SERVICE CENTER.
			WARNING: TO REDUCE THE RISK OF FIRE
			OR ELECTRIC SHOCK, DO NOT EXPOSE
			THIS APPLIANCE TO RAIN OR MOISTURE.
Y	S-Video 1

100-230VAC 50-60 Hz, 165 Watts Max

Video S-Video 2 RS-232 Out RS-232 Control Made In USA

124 5 6 8 1011 12 13

Figure 2-5. VHD Controller Rear Panel
1.	HDMI OUT	Outputs
	Connect this to Input 2 (DVI) on the Vision 140/150 (see Figure 2-2).
2.	HDMI 1 / HDMI 2 (Digital)	Inputs
	Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner with
	a DVI or HDMI output.

3.HD1 / HD2 (5 x Analog BNCs)

Two inputs (five BNCs per input) for connecting either RGB or component high-definition television signals. The VHD Controller automatically detects the signal format: RGB(HV) or YPrPb, 480p, 720p, 480i, 576i or 1080i.

4.COMPONENT VIDEO (RCA connectors)

Standard Definition (480i/576i) Component (YPrPb) input. This is the input for component video from sources such as DVD players.

For best results, do not run your DVD player in progressive mode.

5.COMPOSITE VIDEO INPUT

Standard composite video input for connecting a VCR, laser disc player or other composite video source.

6.S-VIDEO 1 / S-VIDEO 2

Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super VHS (S-VHS) VCR.

7.12-VOLT (750 mA) TRIGGER OUTPUTS

Connection for up to three (3), 12-volt trigger-controlled devices such as retractable screens or screen masks.

8. RS-232 OUTPUT

Connect this to the RS232 IN input on the projector, using the provided communication cable.

Vision Model 140/150 Installation/Operation Manual 11