Vidikron Vision 150, Vision 140 operation manual Isf Day, Cinema

Controls and Functions

Memory Preset Buttons:

8. ISF NT (Night)

Press to recall settings for the current input from the “ISF Night” memory preset.

9.ISF DAY

Press to recall settings for the current input from the “ISF Day” memory preset.

10.CUST 2

Press to recall settings for the current input from the “Custom 2” memory preset.

11.CUST 1

Press to recall settings for the current input from the “Custom 1” memory preset.

12.VIDEO (1)

Press to select Composite video input as the source or to enter the numeric character “1.”

13.S-VID 1 (2) / S-VID 2 (5) (S-Video)

Press to select an S-Video input or to enter the numeric character “2” or “5.”

14.COMP (Component) (3)

Press to select Component SD (480i/576i) video input as the source or to enter the numeric character “3.”

15.HD 1 (4) / HD 2 (7)

Press to select a HD (RGBHV or YPbPr component) input or to enter the numeric character “4” or “7.”

16.HDMI 1 (6) / HDMI 2 (8)

Press to select a Digital Video input or to enter the numeric character “6” or “8.”

Aspect Ratio Selection Buttons:

Use these buttons to select an aspect ratio directly or to enter numeric characters, as follows:

17.16:9 (9)

For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.

18. 4:3 (0)

Scales the input signal to fit 4:3 display mode in the center of the screen.

19.LETBOX (Letterbox)

For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.

20.I-WIDE (IntelliWide)

Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.

21.CINEMA

For viewing 2.35:1 source material.

22.SVC (CineWide-equipped projectors only)

Selects the IntelliWide 2.35 aspect ratio, used for viewing 16:9 source material on a 2.35:1 screen.

Vision Model 140/150 Installation/Operation Manual 15