Basic Operation

Turning on the Power

The Power LED lights orange when power is applied and the power switch is turned on.

Press and hold the ON key on the remote control or the Power key on the projector for ONE second to turn on the unit. The POWER LED will blink orange during warm up period, then light solid green.

" Searching…." will be displayed on the screen before the projector identifies the input signal. This message will remain on the screen until a valid signal is detected.

If an incompatible input signal exceeds the range of the projector a "Not supportive timing" message will be displayed on the screen. This message will remain on the screen until you change the input signal.

Basic Operation

English

29

Page 30
Image 30
Vidikron Vision 20ET owner manual Basic Operation, Turning on the Power