English
Vidikron Owner’s Manual |
|
| |
7. | Insert the new lamp mod- | 9. | Put on the lamp shield. |
| ule into the projector hori- | 10. | Tighten the three screws on |
| zontally until it is securely | ||
|
| the lamp shield. | |
| in place. |
| |
|
|
| |
8. | Tighen the two screws on |
|
|
| the lamp module. |
|
|
11. | Put on the front lamp cover. | 13. Turn on the power and go into the Service menu, select | |
12. | Tighten the screw of front |
| Lamp Reset Timer item to reset lamp usage counter. |
|
| ||
| lamp cover. |
|
|
Troubleshooting
Problem | Possible Cause | Remedy |
| There is no power from power cable. | Plug the power cord into the AC inlet on the rear of this |
|
| unit, and plug the power cord into to the power outlet. |
This unit does not turn | The power switch is not turned on. | Turn on the power switch. |
on. |
|
|
Turned on this unit again while still in the cool- | Wait until this unit completes the cooling down proce- | |
| ing down procedure. | dure. |
| The front lamp cover is not correctly attached. | Correctly attach the front lamp cover. |
|
|
|
44
