Power and extension cords
♦ Do not allow anything to rest on the power cord.
♦ Do not locate this product where persons will walk on the cord.
♦ Use the proper power cord with correct attachment plug type. If the power source is 120V AC, use a power
cord that has UL and C-UL approvals. If the power source is a 240V AC supply, use the tandem (T blade)
type attachment plug with ground conductor power cord that meets the respective European country’s
safety regulations, such as VDE for Germany.
♦ Do not over load wall outlets or power cords. Ensure that the total of all units plugged into the wall outlet
does not exceed 10 amperes.
♦ Ensure that the total ampere ratings on all units plugged into the extension cord is not above the cord’s
rating.
♦ If the power supply cord, which came with your monitor, is to be connected to the PC instead of the wall
outlet, Use an UL/TUV approved computers with receptacle rated 100~240V AC, 50/60Hz,
1.0A(minimum) only.
Environment
♦ Place the monitor on a flat and leveled surface.
♦ Place the monitor in a will-Ventilated place.
♦ Keep the monitor away from：
Overly hot, cold or humid places, places directly under sunlight,
dusty surroundings, equipment that generate strong magnetic fields.
♦ Please adjust the frequency to 75 Hz after setting up the LCD monitor.
♦ Then push the OSD menu button and use the Auto Adjust function to find the best mode of your computer.
Page 4