Quick Installation
1 Remove two rear panel covers
2Connect power cord.
3 Connect video cable
Make sure both the LCD display and computer are turned OFF
Connect the video cable from the LCD display to the computer
Macintosh users: Models older than G3 require a Macintosh adapter. Attach the adapter to the computer and plug the video cable into the adapter. To order a ViewSonic® Macintosh adapter, contact ViewSonic Customer Support.
4 Turn ON LCD display and computer
Turn ON the LCD display, then turn ON the computer.
NOTE: Windows users may receive a message asking them to install the INF file. Note: go to www.ViewSonic.com
5 Audio Installation (optional)
Speakers Connect the audio cable (line color) to the AUDIO OUT port of your computer’s sound card, then to the LCD display’s AUDIO IN (line color) port (see illustration below).
6 Windows users: Set the timing mode (resolution and refresh rate)
Example: 1280 x 768 @ 60 Hz.
For instructions on changing the resolution and refresh rate, see the graphic card’s user guide.
7.Installation is complete. Enjoy your new ViewSonic, LCD display.
You can register your product online at the website for your region. See the Customer Support table in this guide. (page 32)
5
