ViewSonic ND4210w manual If any changes were made to this screen, do the following

2.In the Browser field, enter a startup web screen (for example, http://www.viewsonic.com). Note: The MAC address is a read-only field that displays the built-in MAC address of the unit.

3.In the DHCP field of the Network Configuration screen, tap the down arrow for the pull- down menu and select Enabled to dynamically get network parameters. Make sure there are values in the IP address, Mask, Gateway, and DNS fields although DHCP assigns values to these fields automatically. If you select Disabled, type valid network parameters in these fields.

4.If any changes were made to this screen, do the following:

•To enable the changes, click Apply

•To save the changes, click the Administration menu > click Save Configuration > click Save.

12 ViewSonic ND4210w

Downloaded From TV-Manual.com Manuals