TAS CONFIGURATION
This screen works in conjunction with TAS. (TAS software can be purchased through Tivella at www.tivella.com or through an authorized Tivella dealer/reseller.) Click Management > TAS. The screen shown below appears.
1.In the Timeout (sec) field, type the number of seconds for the ND4210w to access TAS.
2.In the IP Address field is a valid DNS name automatically generated by TAS when connected to a network but empty when used as a standalone.
3.If any changes were made to this screen, do the following:
•To enable the changes, click Apply
•To save the changes, click the Administration menu > click Save Configuration > click Save.
ViewSonic ND4210w | 17 |
Downloaded From
