This screen is used to adjust the display and audio parameters. Click Management > Video/ Audio. The screen shown below appears.
1.Move the Brightness slider: values range between -128 and 127
2.Move the Contrast slider: values range between 0 and 255
3.Move the Saturation slider: values range between 0 and 255
4.Move the Audio Channel Volume (left) slider: values range between 0 and 100
5.Move the Audio Channel Volume (right) slider: values range between 0 and 100
6.If any changes were made to this screen, do the following:
•To enable the changes, click Apply
•To save the changes, click the Administration menu > click Save Configuration > click Save.
16 | ViewSonic ND4210w |
Downloaded From
