ViewSonic NMP-500 manual Browser Configuration

3In the DHCP field of the Network Configuration screen, tap the down arrow for the pull- down menu and select Enabled to dynamically get network parameters. Make sure there are values in the IP address, Mask, Gateway, and DNS fields although DHCP assigns values to these fields automatically. If you select Disabled, type valid network parameters in these fields.

4If any changes were made to this screen, do the following:

•To enable the changes, click Apply

•To save the changes, click the Administration menu > click Save Configuration > click Save.

BROWSER CONFIGURATION

The Browser Configuration screen allows you to make specific screen settings for a specific URL that you chose. Click Management > Browser. The screen shown below appears. Note: 1 millisecond = 1/1000th second.

1In the Macromedia Flash Transparency Source field, select one of the options from the pull-down menu.

2In the Screen rotation angle (clockwise) field, select one from the pull-down menu for the angle of rotation of the HTML content displayed on-screen. This feature is useful when the NMP-500is installed vertically.

3In the Browser Proxy field, select Enabled or Disabled from the pull-down menu.

ViewSonic NMP-500 11 of 38