SETUP
IMPORTANT! BE SURE TO CONFIGURE THE NMP-500 AS SHOWN IN THE FOLLOWING STEPS BEFORE CONNECTING TO THE NETWORK!
1. CONNECT NMP-500 TO PC
Use an Ethernet cable to connect the NMP-500. Use the AC power adapter included to connect the NMP-500to an AC power source like a wall outlet.
Ethernet cable
NMP-500
2.MANUALLY CONFIGURE YOUR PC
Using Windows XP, click the Windows Start button in the task bar > right-click on My Network Places > select Properties > right-click on the Network Connection associated with your Network Adapter and select Properties > click Internet Protocol (TCP/IP) and click Properties.
Enter a Static IP Address for example 192.168.12.x, in the same range as the NMP-500.
