![](/images/new-backgrounds/1112404/11240467x1.webp)
IMAGE Menu
IMAGE![](/images/new-backgrounds/1112404/11240467xi2.webp)
Menu
With the IMAGE menu, items shown in the table below can be performed.
Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.
������������ | ����������� | |
| � | � |
��������� | �������������������� | |
������� | ������������������ | |
������� | ������������������� | |
������� | �������������������� | |
�������� | ������������������� | |
�������� | ��������������������� | |
����������� | ��������������������� | |
� | � |
|
Item
Description
|
| Using the buttons ▲/▼ switches the mode for aspect ratio. |
|
|
| For an RGB signal |
|
|
| NORMAL 4:3 16:9 SMALL |
|
ASPECT |
| For a video signal, |
|
| 4:3 16:9 14:9 SMALL |
| |
|
|
| |
|
| For a no signal |
|
|
| 4:3 (fixed) |
|
|
| • The NORMAL mode keeps the original aspect ratio of the signal. |
|
|
| Using the buttons ▲/▼ adjusts the |
|
OVER SCAN |
| Large (It reduces picture) Small (It magnifies picture) |
|
| • This item can be selected only for a video, | ||
|
| • When this adjustment is too large, certain degradation may appear | |
|
| at the frame area of the picture. In such a case, please adjust small. | |
|
| Using the buttons ▲/▼ adjusts the vertical position. |
|
|
| Up Down |
|
|
| • |
|
V POSITION |
| on the screen. If this occurs please reset the vertical position to the | |
| default setting. Pressing the RESET button when V POSITION is |
| |
|
| selected will reset the V POSITION to the default setting. |
|
|
| For a video signal, |
|
|
| The adjustable range of V.POSITION depends on the OVERSCAN setting. | |
|
| It is not possible to adjust when the OVERSCAN is set to 10. |
|
|
| Using the buttons ▲/▼ adjusts the horizontal position. |
|
|
| Left Right |
|
|
| • | |
H POSITION |
| on the screen. If this occurs please reset the horizontal position to |
|
| the default setting. Pressing the RESET button when H POSITION | ||
|
| is selected will reset the H POSITION to the default setting. |
|
|
| For a video signal, |
|
|
| The adjustable range of H.POSITION depends on the OVERSCAN setting. | |
|
| It is not possible to adjust when the OVERSCAN is set to 10. |
|
|
| Using the buttons ▲/▼ adjusts the horizontal phase to eliminate flicker. | |
H PHASE |
| Right Left |
|
| • This item can be selected only for an RGB signal or a component | ||
|
| ||
|
| video signal. |
|
ViewSonic | PJ658 | 30 |