OPTION Menu
OPTION Menu (continued)
Item |
| Description |
|
|
|
|
|
|
|
|
|
| REMOTE FREQ. |
|
|
| Use the ▲/▼ button to change the Projector’s remote sensor set- | ||
| ting. |
|
|
| 1:NORMAL 2:HIGH |
|
|
| Items with a checkmark are on. The factory default setting is for | ||
| both 1:NORMAL and 2:HIGH to be on. If the remote control does | ||
| not function correctly set the this to either only 1 or only 2 as de- | ||
| scribed in Remote Control Settings. |
| |
| Neither can be turned off at the same time. |
| |
| INFORMATION |
|
|
| Selecting this item displays a dialog titled “INPUT INFORMATION”. | ||
| It shows the information about the current input. |
| |
| |||
SERVICE | RGB | COMPONENT | |
1024x768 @60Hz | SECAM | 576i @50 | |
| FRAME LOCK | AUTO | SCART RGB |
•The “FRAME LOCK” message on the dialog means the frame lock function is working.
•The “SCART RGB” message means the COMPONENT VIDEO port is working as a SCART RGB input port. Please refer to the COMPONENT item in this menu.
•This item can’t be selected for no signal and sync out.
FACTORY RESET
Selecting RESET using the button ▲ performs this function. By this function, all the items in all of menus will collectively return to the initial setting. Note that the items LAMP TIME, FILTER TIME, LAN- GUAGE and OPTION_SECURITY are not reset.
RESET CANCEL
ViewSonic | PJ658 | 43 |
