ii.To switch between input signals, click on your desired signal.
Important
•The Menu button can also be used to go back to previous OSD menus, exit and save menu settings.
•The source list varies according to the connectors available on the projector.
•When you use the projector control panel or remote control to change the OSD menu settings, it may take a while for the web browser to synchronize these changes with the projector.
2.The tools page allows you to manage the projector, configure the LAN control settings and secure access of remote network operation on this projector.
i
ii
iv
iii
v
i.This area is only used with a Crestron Control System. Please contact Creston or refer to the Crestron user manual for setup information.
ii.This area is used for naming the projector, associating it with a particular loca- tion, assigning a responsible party to it, and adjusting network settings.
iii.This area is used to set User and Admin passwords. When password protec- tion is enabled, unauthorized changes to the projector configuration will be avoided.
Important
•To prevent errors, only input the English alphabet and digits on the tools page.
•After making the adjustments, press the Send button and the data will be saved for the projector.
iv. Press Exit to go back to the remote network operation page.
43
