Connecting a computer or monitor
Connecting a computer
The projector provides two VGA input sockets that allow you to connect them to both! IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are! connecting legacy version Macintosh computers.
To connect the projector to a notebook or desktop computer:
1.Take the supplied VGA cable and connect one end to the
2.Connect the other end of the VGA cable to the Computer in 1 or Computer in 2
signal input socket on the projector.
Important
Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination.
Connecting a monitor
If you want to view your presentation
To connect the projector to a monitor:
1.Connect the projector to a computer as described in “Connecting a computer” on page 18.
2.Take a suitable VGA cable (only one supplied) and connect one end of the cable to
Or if your monitor is equipped with a DVI input socket, take a VGA to
3.Connect the other end of the cable to the Monitor Out socket on the projector.
Important
The Monitor Out output only works when Computer in 1 or Computer in 2 is made to the projector.
ViewSonic Pro8200 | 18 |