ViewSonic PRO8200 Connecting Video source devices, Best video quality, Better video quality

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one of the following output sockets:

„Component Video

„S-Video

„Video (composite)

You need only connect the projector to a Video source device using just one of the above!connecting methods, however each provides a different level of video quality. The method!you choose will most likely depend upon the availability of matching terminals on both the!projector and the Video source device as described below:

Best video quality

The best available video connection method is Component Video (not to be confused with composite Video). Digital TV tuner and DVD players output Component Video natively, so if available on your devices, this should be your connection method of choice in preference to (composite) Video.

See “Connecting a Component Video source device” on page 20 for how to connect the projector to a component video device.

Better video quality

The S-Video method provides a better quality analog video than standard composite Video. If you have both composite Video and S-Video output terminals on your Video source device, you should elect to use the S-Video option.

See “Connecting an S-Video source device” on page 20 for how to connect the projector to an S-Video device.

Least video quality

Composite Video is an analog video and will result in a perfectly acceptable, but less than optimal result from your projector, being the least video quality of the available methods described here.

See “Connecting a composite Video source device” on page 21 for how to connect the projector to a composite Video device.

ViewSonic Pro8200 19