Appendix
LED Indicator Messages
LED type | Color | Status | Meaning |
Power LED | Blue | Solid | Standby mode when green mode is turned on. |
Lamp LED | Red | Off |
|
Temp LED | Red | Off |
|
Power LED | Blue | Flash | Standby mode when green mode is turned off. |
Lamp LED | Red | Off |
|
Temp LED | Red | Off |
|
Power LED | Blue | Solid | Powering up |
Lamp LED | Red | Off |
|
Temp LED | Red | Off |
|
Power LED | Blue | Solid | Normal operation |
Lamp LED | Red | Off |
|
Temp LED | Red | Off |
|
Power LED | Blue | Flash | Powering down |
|
|
| (The projector needs to cool for 35 seconds |
Lamp LED | Red | Off | |
|
|
| after the power is turned off.) |
Temp LED | Red | Off | |
Power LED | Blue | Solid | The projector system has some!problems |
Lamp LED | Red | Solid | with its fans, so the projector cannot start up. |
Temp LED | Red | Flash |
|
Power LED | Blue | Solid | The lamp has reached its end of life and must |
|
|
| be changed soon. The lamp will continue to |
Lamp LED | Red | Solid | |
|
|
| opearate until it failes. Change the lamp. If the |
Temp LED | Red | Off | |
|
|
| lamp is off, then the ballast will become mal- |
|
|
| fuction. |
Power LED | Blue | Solid | Temperature is too high. The lamp will turn off. |
|
|
| The fan!motor is cooling the lamp. |
Lamp LED | Red | Flash | |
Temp LED | Red | Off |
|
Power LED | Blue | Off | The lamp ignition failied. If temperature is too |
|
|
| high, the fans!will cool the lamp. |
Lamp LED | Red | Solid | |
Temp LED | Red | Solid |
|
Power LED | Blue | Flash | The projector needs to cool for 90 seconds |
|
|
| after the power is turned off. If you try to re- |
Lamp LED | Red | Off | |
|
|
| start the projector, it will shut down again. |
Temp LED | Red | Off |
35