Operation
Powering On/Off the Projector
Powering On the Projector:
1.Remove the projector lens cap.
2.Complete the AC power cord and peripheral signal cable(s) connections.
3.Press 
to turn on the projector.
The projector takes a minute or so to warm up.
4.Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source.
•If you are connecting multiple sources to the projector simultaneously, press SOURCE on the projector to select your desired signal or press your desired signal key on the remote control.
Warning
•Remove the lens cap first before powering on.
•Never look into the lens when the lamp is on. This can damage your eyes.
•This focal point concentrates high temperature. Do not place any object near it to avoid possible fire hazard.
Powering Off the Projector:
1.Press 
to turn off the projector lamp. You will see a message "Power off" appear on the screen.
2.Press 
again to confirm.
• When the Power LED begins flashing, the projector has entered
3.Disconnect the AC power cord from the electrical outlet and the projector.
4.Do not turn on the projector right after power off
17
