Positioning Your SC-Z55

Setting Up Your SC-Z55

2.1Positioning Your SC-Z55

There are two ways to position your SC-Z55:

•Put it (with its stand) on a desk or a desired place uprightly.

•Mount it on the back of a monitor using a VESA mount kit.

To mount your SC-Z55 on the back of a monitor, please follow the steps below:

Step 1: Remove the Stand from Your SC-Z55

Step 2: Understand Your Stand / VESA Mount Kit for SC-Z55

Step 3: Store Away Screws inside the Bracket

Step 4: Remove Screws from the Bracket

Step 5: Mount Your SC-Z55

To remove the stand from your SC-Z55, please do the following:

1. Place your SC-Z55 on a flat surface with the stand side upward.

2. Remove the screw that fixes the stand to your SC-Z55.

3. Store away the removed screw inside the stand. Detailed instructions will be provided in Step 2 and 3.

NOTE

• It’s highly recommended to store screws away inside the stand when not needed to prevent them getting lost.