TV Connection
18
Note:
Some TV sets are equipped with separate composite and component audio
inputs. Be sure that you have connected the correct one.
SCART Video Connection
If your TV is equipped with SCART input, connect the Composite connectors to a SCART
adapter to output the audio/video signal. (SCART adapter not provided)
Optical Audio Connection
For a high quality digital audio, connect this connector to an AV receiver which equips a
digital audio decoder. (TOSLINK optical cable not provided)
Power Connection
Connect the DC jack of the AC adapter to the connector marked “DC IN” and plug the other
end into an electrical outlet.
Activating for Playback
1. Turn on your TV and AV receiver.
2. Press the Power Switch on the front panel to turn on this device.
3. Press the STANDBY button on the remote control to activate this device. The
activation takes about 5-7 seconds, and the LED will blink at the same time.
4. After the LED stops blinking and glows steadily bright, this device is ready to use for
playback.
5. After playback, press the STANDBY button again to return to Standby mode.
Green Red
Blue White
Red
9LHZ6RQLF 903