Do the following to adjust the screen image:
1Todisplay the Main Menu, press button [1]. From the Main Menu you can
also navigatet othe other menus shown below:
NOTE: AllOnView menus and adjustment screens disappear automatically
after about 10 seconds(default). This time can be changed on the OSD Time
Out menu.
2Tohighlight a control you want to adjust, press ▲or ▼to scroll up or down
the Main Menu.
3Toselect the highlighted control, press button[2].
4Toadjust the selected control, press the up ▲or down ▼butt ons.
5Tosave the adjustments and exit the menu, press button [1]twice.
The following tips may help youoptimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1600 x
1200 @ 60Hz to the VP230mb. (Look for instructions on "changing the
refresh rate" in your graphic card's user guide.)
• If necessary,make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated "activearea" of the
ViewPa nel®.)
• Adjust Fine Tuneso that the screen image looks focused, crisp, and sharp.
Contrast/Brightness
ManualImage Adjust
ColorAdjust
SetupMenu
Memory Recall
AdvancedMenu
AutoImage Adjust
ViewSonic VP230mb 8