ViewSonic VPC100 Operating, Using the Power Button, Using the Card Reader, Inserting the card

Operating

Using the Power Button

Turning On the All-in-One PC

Press the power button to turn on your All-in-One PC.

WARNING

Turning off your computer before it fully boots, may cause an error the next time you turn on your All-in-One PC.

Turning Off the All-in-One PC

In Windows XP®, click Start > Turn Off Computer > Turn Off or push the power button.

NOTE

You can configure Windows to automatically shut down when you press the power button. To do this, click Start > Control Panel > Power Options > Advanced tab. In the Power buttons option, select “Shut down” from the list. Be sure to shut down all running applications before powering off.

Using the Card Reader

The built-in card reader supports various types of memory cards, such as XD, SD, SDHC, MS, MS Pro, and MMC.

Inserting the card

1.Insert the card with the metallic connectors facing towards you.

2.Push gently until the card clicks into place.

Removing the card

NOTE

Before removing a memory card, use the configuration utility on the taskbar to stop the memory card operation. Failure to do so may result in data loss.

1.Push the card gently to eject it.

2.Pull the card out from the port.

ViewSonic VPC100 13