ViewSonic VPC100 manual When to Use the BIOS Setup Utility, Starting BIOS Setup, Function

BIOS Setup Utility

When to Use the BIOS Setup Utility

You need to run the BIOS Setup Utility when:

•You see an error message on the screen requesting you to run Setup.

•You want to restore the factory default settings.

•You want to modify some specific settings of the hardware.

•You want to modify some specific settings to optimize system performance.

Starting BIOS Setup

A keyboard is required to access and make selections in the BIOS Setup Utility. Make sure the keyboard is properly installed before you power up your All-in-One PC.

NOTE

•The Setup screens shown in this chapter are for your reference only. The actual items or settings may slightly differ from that on your computer.

•The Setup utility may have been updated after the publication of this user guide.

•The settings you select in your operating system might override similar settings in the Setup.

To run BIOS Setup, follow the steps below:

1.Turn on the All-in-One PC.

2.When the ViewSonic® logo appears, quickly press the Delete button on the keyboard.

NOTE

If Windows operating system starts up before you press the Delete button and you still wish to enter the BIOS Setup, restart the All-in-One PC then follow the same procedures above.

Moving Around and Making Selections

The following table lists the control keys you will use to move around and select BIOS settings.

Key	Function
nd	Move to the previous / next item

nd		Move to the previous / next menu screen
and	-	Increase / decrease fi eld values

Tab and Shift-Tab Go to the next / previous fi eld

ViewSonic VPC100 16