COMPONENT NAMES (continued)
Remote control
POWER OFF button 16
POWER ON button 16
16 POWER ON/OFF button
MUTE button 17
17 VOLUME UP/DOWN buttons
VOL
RGB/VIDEO buttons 17
PinP button 37
AUTO button 19
MENU button 19
OK button 19
ID button 19
RGB 1 | RGB 2 | MUTE | VOL |
AV1 | AV2 | AV3 | AV4 |
AUTO | PinP | SIZE | RECALL |
MENU |
|
|
|
|
| OK |
|
ID |
|
| ID SET |
18SIZE button
18RECALL button
19RETURN button
19SELECT/ADJUST buttons
19ID SET button
Loading Batteries
1. Open the battery cover.
• Slide back and remove the battery cover in the direction of the arrow.
2.Load batteries.
•Load two Size AA batteries included observing the correct polarities.
3.Close the battery cover.
•Replace the battery cover in the direction of the arrow and snap it back into place.
Handling the Remote Control
Use the remote control within about 5m from the front of the unit’s
With in 30
With in 30 degrees degrees
About 3m | About 3m |
About 5m
CAUTION
•Do not use new and old batteries together. The batteries could explode or leak, resulting in fires, physical injury, or stains.
•When loading batteries, observe their correct polarities as marked on the product. If loaded in the wrong direction, the batteries could explode or leak, resulting in fires, physical injury, or stains.
ATTENTION
•Do not drop or impact the remote control.
•Do not splash the remote control with water or put it on a wet object.
•Before leaving the remote control out of use for an extended period of time, remove the batteries from it.
•If the remote control begins to lack responsiveness, replace the batteries.
•Strong light, such as direct sunlight, shining on the photoreceptor of the remote control can cause operational failure. Position this unit to avoid direct contact with such light.
ViewSonic VPW4255 12
