OPERATING INSTRUCTIONS (continued)
|
|
| VOL |
|
RGB 1 | RGB 2 | MUTE | VOL |
|
AV1 | AV2 | AV3 | AV4 |
|
AUTO | PinP | SIZE | RECALL | RETURN button |
AUTO button |
|
|
|
|
MENU |
|
|
|
|
MENU button |
|
|
| SELECT/ADJUST |
|
|
|
| |
|
| OK |
| buttons |
ID |
|
| ID SET | OK button |
ID button |
|
|
|
|
ID SET button
Automatic Adjustment of Screen Position and the Clock
Adjustment of the screen to a position suitable for the PC signal and the clock adjustment can be performed automatically by pressing the AUTO button of the remote control.
IMPORTANT
Select the Automatic Adjustment of Screen Position for each input (RGB1 or RGB2) and for each signal.
Using the Menu Screen (On-screen display system)
When the MENU button is pressed, the adjustment menu screen will be displayed; from there, PC signal adjustment and setting is possible by using the SELECT button, ADJUST button and OK button.
• Refer to 20 - 24 | concerning the adjustment items and the | ||||
settings. |
|
|
|
|
|
|
|
|
|
| |
Example: Selecting the Picture screen |
| ||||
|
|
|
|
| |
1. Press the MENU button to display the Main Menu | |||||
screen. |
|
|
|
|
|
|
|
|
|
| |
|
|
| Picture |
| |
MENU |
|
| Audio | ||
|
| Timer | |||
Function
Setup
Language
Select
OK Set
2.Press the OK button to display the Picture Menu
screen. (Use the 
and 
SELECT buttons to select other items.)
| Picture |
|
|
|
| Contrast |
| : | + 31 |
OK | Brightness |
| : | – 31 |
Color |
| : | 0 | |
|
| |||
| Tint |
| : | + 31 |
| Picture Enhancement | : | Off | |
| Color Temperature | : | Normal | |
| Color Temp.Adjust |
|
| |
| Reset |
|
| Reset |
| Select | Return |
| Exit |
*Depending on the signal, satisfactory adjustment may not be possible. In such a case, adjust by referring to the
Setup Menu item.
3.Use the 
and 
SELECT buttons to select the item to be adjusted and then use the 
and 
ADJUST buttons to adjust (example: Contrast).
Independent Operation of Multiple Monitors (ID No)
Setting the ID No. of the remote control allows separate control of up to a maximum of seven monitors. Remote control ID No. 2 (initially ID no. 1) can be set by pressing the ID SET button for 2 sec. or more while holding down the ID button. The number will be
incremented (2…6→7→1→2) when this button is pressed continuously.
The remote control ID no. can be checked by pressing the ID SET button while holding down the ID button.
ID Number
Monitor | [ 1 ] |
R/C | [ 1 ] |
Monitor ID no.
Remote control ID no.
The ID remote control is operated by pressing the various buttons while holding down the ID button; Operation is possible only when the remote control and monitor ID nos. are the same.
•The remote control can be operated normally by pressing the various remote control buttons without holding down the ID button.
•Set the monitor using the ID No. of Function MENU. 22
Contrast |
| + 31 |
Next / Prev | Adjust | Return |
•Press the RETURN button to return to the previous screen.
•If there is no operation for a period of one minute, the Adjustment Menu screen will be closed automatically.
ViewSonic VPW4255 19
