33 ViewSonic N2600w
ENGLISH
Troubleshooting
No power
yMake sure the LCD TV is properly connected.
yMake sure the AC power cord is properly connected.
yMake sure the AC power is ON, DC power button is ON (Green LED).
yPlug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage.
Poor or no picture
yThe TV station may be experiencing problems. Try another channel.
yThe Cable TV signal may be scrambled or encoded. Please contact your local cable
operator.
yMake sure that connection to other components are correct.
yMake sure that setup has been done correctly after connections.
yMake sure the correct input is selected and the input signal is compatible.
Strange color, light color, or color misalignment
yEnsure that the video cable is securely connected.
yThe picture may appear dim in a brightly lit room.
yAdjust brightness and contrast.
yCheck the input signal setting.
No Sound
yCheck your audio connections
yThe MUTE button may have been pressed, try pressing this button again.
yCheck your audio settings, your TV audio may be set to minimum.
yPress the Volume + (Up) button on the remote control.
Remote control unit does not operate
yMake sure batteries are inserted correctly.
yBatteries could be weak or dead. Replace batteries.
yIs a fluorescent light illuminated near the remote control sensor?
yThe path of the remote control beam may be blocked. Make sure the path is clear and that
the remote control is aimed at the remote control sensor on the TV.
yPress only one button at a time and it is the correct one for the operation you want to
perform.
Unit cannot be operated
yExternal influences such as lightning or static electricity may cause improper operation.
In this case, operate the unit after first turning on the power of the LCD TVand the AVC
System, or unplug the AC cord for 1 to 2 minutes, then replug again.
Downloaded From TV-Manual.com Manuals